arrow-header-indent Lighted Personnel Door Canopies

Lighted Canopy
VIEW SPEC SHEET INSTALL INFORMATION REQUEST A QUOTE
Note: To submit electronically, download, complete and save the form to attach in an email.

Metallic Products keeps you covered with personnel door canopies. Make sure you have economical and attractive overhead protection from the elements with our canopies. This product is specifically designed to withstand the elements.

Already Have a Metallic Products Canopy?

Transform it into a lighted personnel door canopy with a retrofit kit!
Contact Metallic Products for kits and installation instructions.

Wind Speed
140 mph [IBC 2006 & 2009]
4’ Projection – Max Allowable Uplift = 61.5 psf 5’ Projection – Max Allowable Uplift = 50.8 psf
180 mph [IBC 2012 & 2015]
4’ Projection – Max Ultimate Uplift = 102.5 psf 5’ Projection – Max Ultimate Uplift = 84.6 psf
Snow Load (Note: on the canopy):
4’ projection 34 psf 5’ projection 26 psf (50 psf, 75 psf, 100 psf available upon request)
  • Importance factor, I=1.0 [Risk Category II]
  • Topographic factor, K.zt = 1.0
  • Wind directionality, k.d. = 0.85
  • Elevation of canopy:
    • Max 30′ above ground for Exposure-B
    • Max 15′ above ground for Exposure-C [Exposure-C available in 4′ projection only]
  • Canopy shall not be located in the corner zone of the building [‘a’ dimension]

Construction

  • Single door contains one LED light in the center of soffit panels, double door contains two LED lights 20” from the edge width
  • Wet rated LED downlight provides uniform luminance (120V, 780 lumens, 4000K color temperature) from a low profile flat lens
  • LED lifetime of 50,000 hours
  • ENERGY STAR-certified luminaire contains no mercury or lead
  • Precision molded lens features high transmission polymer with UV stabilized protecting film
  • Fixture mounted in soffit of canopy and sealed to top-mounted junction box
  • Electrical contractor must ensure of fit, wiring and proper mounting in the electrical junction box. This includes all applicable national and local codes
  • 24-gauge flat soffit and integral gutter with rear-mounted drains
  • 16-gauge galvanized internal frame for 4’ projection and 14-gauge galvanized internal frame for 5’ projection
  • 5/8” diameter rod ends 4140 hot rolled annealed (HRA) [F.y = 125 ksi]
  • 18-gauge telescoping support channels mount behind wall panel between girts, mounting clips and fasteners included
  • 1/2″ or 3/4” galvanized pipe hangers with adjustable rod ends
  • Economical and attractive overhead protection from the elements
  • Specifically designed for high wind load and heavy snow load areas

Sizes

  • Standard sizes for single door with one light (4’6” x 4’0”) and double door with two lights (7’6” x 4’0”); also available in 3’ and 5’ projections
  • Can be mulled together for continuous run applications

Finishes

  • Galvalume steel
  • All standard metal building colors available in silicone polyester, Kynar® and powder coated finishes
  • Custom color matching
  • Single color or two-tone (contrasting gutter/ fascia and soffit)

Options

  • Masonry mount (anchors by others)
  • Decorative wall accents
  • Front mounted drains

Request More Information
Continuous Ridge Vents

Continuous Ridge Vents

Personnel Door Canopies

Personnel Door Canopies

Louvers

Louvers

Roof Access Hatches

Roof Access Hatches

Die Formed Flashing

Die Formed Flashing

Roof Curbs

Roof Curbs

Wall Fans

Wall Fans

Low Profile Vents

Low Profile Vents

Made in the Shade.