Pipe Flashings
Features:
  • Provides tight seal to pipe penetrations
  • Performance is unnaffected by ice, snow, hail stones, vibration or expansion and contraction
  • Heavy duty aluminum alloy base is highly flexiable and corrosion resistant and is compatible with virtually any roofing material
  • Stepped cone designeasily adapts to any roof pitch
  • Available in 10 sizes to fit pipe diameters from 1/8" -26"
  • EPDM available in black or grey / Silicone availablein red
  • Optional split-side construction for wrap around applications
EPDM
Silicone
Advance Ozone Resistance tested to
70 hours @ 500 pphm
70 hours @ 500 pphm
High Temprature Resistance

tested to....intermediate
+135 degrees C

(+275 degrees F)
+260 degrees C

(+500 degrees F)
tested to ....continuous
+100 degrees C

(+212 degrees F)
+100 degrees C

(+212 degrees F)
Low Temprature Resistance tested to
-55 degrees C

(-65 degrees F)
-55 degrees C

(-65 degrees F)
Tensile Strength minimum
10 MPa (1450 psi)
5MPa (700psi)
Comresion Set maximum
25%
50%

Installation
1. Trim

Trim opening to 20% smaller than pipe Diamerter
2. Slide

Slide down over pipe
3. Form

Press down, bemding flashing to fit irregularites. Use large slot screwdriver to press into tight angles
4. Seal

Apply sealant between MasterFlash anf roofing
5. Fasten

Use fasteners to finish sealing
Description
Pipe Size
Base Dimension
Vendor No.
Net Wt.
Master Flash
1/8" - 3/4"
2 1/4"
MINI
.2#
Master Flash
1/4" - 2"
4 1/2"
#1
.2#
Master Flash
1 1/4" - 3"
6"
#2
.3#
Master Flash
1/4" - 4"
8"
#3
.5#
Master Flash
3" - 6"
10"
#4
.8#
Master Flash
4" - 7"
11"
#5
1#
Master Flash
5" - 9"
12"
#6
1.2#
Master Flash
6" - 11"
14"
#7
1.6#
Master Flash
7" - 13"
17"
#8
2.6#
Master Flash
10" - 18"
25"
#9
3.86#
Master Flash
13" - 26"
34"
Maxi
5.12#